"I wanted to thank you for the great job on getting me the curtains for the warehouse. They worked out great and look good."
-- Caleb Advocate - Hydrofarm - CA
Face Mount 16 Gauge galvanized Industrial Pre studded hardware
Doors to 18' FT HIGH
Hardware installs above an opening on the face of the wall. 1 ft wide plates fit over the strips securing each into position. Hardware is common for larger doors and industrial applications.
Total Cost: $8.50 / FT
Header Mount 16 Gauge galvanized Industrial Pre studded hardware
Doors to 18’ FT HIGH
Hardware installs vertically up into the jamb or header of a door opening. 1 ft wide plates fit over the strips securing each into position. Hardware is common for larger doors and industrial applications.
Total Cost: $8.75 / FT
16 Gauge Galvanized
Universal Mount Hardware
Doors to 18' FT HIGH
Hardware installs both as header or face mount. 1 ft wide plates fit over the strips securing each into position. Hardware is common for larger doors and industrial applications.
Total Cost: $14.50 / FT
Aluminum Max Bullet Hardware - Universal
Doors to 18’ FT HIGH
Strip installation requires only pre- punched strips. No bolts and nuts are required. Hardware installs both as face or header mount. Individual strips snap into position.
Total Cost: $17.50 / FT
Polymer Max Bullet - Universal
MB- P
Doors to 9 FT High
Strip installation requires only pre- punched strips. No bolts and nuts are required. Hardware installs both as face or header mount. Individual strip snap into position. Polymer technology is common on smaller kits or light duty strips.
Total Cost: $5.50 / FT
16 Gauge Galvanized Face Mount Hardware – Powder Coated White
Doors to 18 FT High
Clamping Plates are powder coated
white for a cleaner and commercial look
Total Cost: $17.50 / FT
Flat Bar - Pre Drilled for loop strips
Doors to 9 FT HIGH:
Flat Bar is common for smaller
strip door kits & Hood Enclosures –
Strips have a built in overlap
Total Cost: $3.90 / FT
Sliding Strip Door Hardware – FIXED PANEL
Doors to 9 FT HIGH:
Sliding Strip Door Hardware is made up of 16 Gauge FACE Mount Galvanized track and trolley connector with corresponding track Track is twice the width of the door
Trolley –4 Wheel B-Bearing
$29.00 / FT
Accordion Retracting Hardware - Galvanized
Doors to 18 FT High
Accordion hardware allows overlapping 12" strips to retract to the sides of a door. Hardware can be installed so all strips slide to one side (single sliding) or so that half the strips bunch to the right and half to the left
(bi parting).
Total Cost: $69.00 / FT
Stand off Mount – Allows Overhead
door to slide behind curtains
Doors to 9 FT HIGH:
Stand Off hardware projects out from a wall and runs across the width of the opening thus creating space for an overhead door to slide behing the strips.
